Easy Aero Roof Ventilator

Quick, easy installation in your company vehicle.

The Easy Aero roof ventilator provides healthy ventilation and removes moisture, harmful gases and heat from your company vehicle! The push and pull technology creates powerful air circulation. The unique thing about the Easy Aero is that it doesn’t require separate floor drainage, which not only saves a great deal of work, but also prevents serious damage to your company vehicle’s exhaust, wiring and braking system. Easy to use, install and maintain.

Specifications

  • Fits under a roof rack
  • Material ABS plastic
  • Drill hole 2 x 90 mm
  • Dimensions 300 x 55 x 150 mm
  • Available in black & white
  • 90 mm punch is optional

* Also suitable for vehicles with a roofliner, adjustable from 1 mm to 50 mm using adapter (optional).    

THE BENEFITS OF THE EASY AERO

The Easy Aero removes irritating odours, moisture and gases or vapours and creates a healthy work environment thanks to a powerful supply of fresh air. The roof ventilator is covered with a protective grille on the inside, which can be closed if required.

Sustainable

The Easy Aero is sustainable to use, doesn’t require any electricity and the roof ventilator is fully recyclable.

Easy assembly

The Easy Aero roof ventilator can be installed in your company vehicle in just three easy steps.

High capacity

The push and pull effect of the Easy Aero roof ventilator results in an output of 70 m3 per hour.

Robust material

Made of strong plastic and less fragile because no rotating parts have been used. Shockproof, virtually silent and suitable for going through the car wash.

No floor drainage

The geometry of the Easy Aero roof ventilator negates the need for floor drainage, in contrast to traditional roof ventilator models.

Sleek design

Instead of rotating parts, push and pull forces have been incorporated into a single model. Fits both under roof racks and in convertibles. Adjustable ventilation strength.

View the Easy Aero Roof Ventilator

“The Easy Aero is really easy. Easy to install on virtually any car.
No rotating parts and no electricity. To summarise: an attractive design that works as it should!”
 

Silvester Keijzer – Sterntec

Installation in no time at all

Install the Easy Aero roof ventilator in three easy steps.

Step 1

Mark out the holes using the drilling template provided and create the holes in the roof using a 90 mm punch (available upon request).

Montage Easy Aero dakventilator bedrijfswageninrichter

Step 2

Use sufficient sealant on the underside and poke the tubes through the holes with the grille on the front.

Montage Easy Aero dakventilator bedrijfswageninrichter

Step 3

Screw the cover plate onto the inside of the roof using the screws provided. The roof ventilator is installed: easy!

View here the assembly quick guide for even more installation convenience.

At 70 m3 per hour, the Easy Aero has demonstrably
m
ore capacity than traditional models. 

Frequently asked questions

Where can I buy the Easy Aero roof ventilator?

The Easy Aero roof ventilator is manufactured by Imbema and can be bought at www.easy-aero.com. In order to offer as good a service to our customers as possible, we have a large network of reliable partners to whom we can outsource the installation if required. View our partner network.

For what vehicles is the Easy Aero suitable?

The Easy Aero is suitable for all company vehicles that have a roof rack height of at least 55 mm. A separate adapter is available for company vehicles that have a soft top.

What is the difference with traditional roof ventilators?

The Easy Aero has demonstrably greater capacity than traditional models. The push and pull effect results in an output of 70 m3/hour. The strength of ventilation power can be adjusted.

The Easy Aero is easy and quick to install, thanks to a detailed installation guide and video instructions. The geometry of the Easy Aero means that it doesn’t require floor drainage, in contrast to traditional models. Easy!

What colours does the roof ventilator come in?

The Easy Aero comes in black or white as standard. If you require the roof fan in a different colour, this is possible upon request.

How do I install the Easy Aero roof ventilator?

An installation guide is included with your order.

Mark out the holes using the drilling template provided and create the holes in the roof using a 90 mm punch. This can be ordered as an optional extra. Use sufficient adhesive on the underside and poke the tubes through the holes with the grille on the front. Screw the cover plate onto the inside of the space on top using the screws provided. The roof ventilator is installed: easy!

The geometry of the Easy Aero means that it doesn’t require floor drainage, in contrast to traditional models.

Can I also outsource installation?

If you wish to outsource the installation of the Easy Aero roof ventilator, you will find reliable companies near you within our partner network. For further information about the costs or to make an appointment, please contact them directly.

What comes with the ventilator?

When you order the roof ventilator, it comes with attachment screws, a drilling template and an installation guide. A punch is available upon request.

Can the Easy Aero roof ventilator go through the car wash?

Yes, of course! The Easy Aero roof ventilator is made of strong plastic and is shockproof. Because rotating parts are not used, the roof fan is less fragile and virtually silent.

How is the Easy Aero roof ventilator tested?

The Easy Aero roof ventilator is subjected to rigorous testing. Imbema has its own R&D department where the products are designed, produced and tested.

Is a roof ventilator required by law?

That depends on what is being transported and in what country. Ventilation is generally compulsory when transporting ‘hazardous goods’. The Easy Aero air ventilator removes moisture, harmful gases and heat from the company vehicle and creates a healthy work environment for passengers.

How can I become a distributor of the Easy Aero?

By sending a request for further information to Gerald Dekker: gdekker@imbemarhiwa.nl or calling +31 (0)88 130 6695.

More information

Easy Aero dakventilator voor bedrijfswagens